Pleatco PAP150, Pentair Clean & Clear 150, R173216, 590543 Swimming Pool Filter
Pleatco PAP150, Pentair Clean & Clear 150, R173216, 590543 Swimming Pool Filter. MADE ENTIRELY IN THE USA! Pentair Clean and Clear Plus 150. Height: 31 1/8 inches. Outer Diameter: 10 1/16 inch. Inner Diameter: 6 inches. Tolerance Plus or Minus 1/16 inch. The high impact resin end caps may vary in color but have the same dependable quality. Is a trademarked private label cartridge. MADE ENTIRELY in the USA! Constructed from 4 oz filter media for optimal filtration. Many cartridges are now made in China or Mexico; please check their packaging. Please make sure your address is correct. If an item qualifies for a return, it must be in the condition received. Most issues can be resolved right away. How to Increase the Longevity of Your Cartridge. The length of time a cartridge lasts depends on several factors. THE MOST IMPORTANT ONE IS, the number of times the cartridge is cleaned. The cartridge should be cleaned with a garden hose and not power washed. The cartridge should be cleaned every 4-5 weeks in season. The cartridge will need to be cleaned every day until the pool is clean, if there is a lot of debris or algae. The cartridge that is not cleaned often enough, could collapse. The condition of the pool when installed, if there is debris, algae, or pollen. The length of the swimming season. The water chemistry of the pool. The pools inside a screened in area, usually have less debris. The number of swimmers, suntan lotion, pets in the pool, etc. The outlying area around the pool, if treated for insecticides, fertilizers, etc. The chemicals used in the pool to remove phosphates break down the filter media. The cartridge will need to be replaced after acid washing the pool, resurfacing the pool, and or phosphate treatments. Always keep an eye on the PRESSURE GAUGE, and when the pressure rises 8 LBS from the day you install, this usually means the cartridges need to be cleaned. How to Measure your Pool Cartridge to 1/16 inch. Measure the outside diameter (OD) of the cartridge across the top of the end cap in inches. Measure the overall length of the cartridge in inches including the end caps. Do not include any handles or threads on the bottom end cap. When possible one of the best ways to measure is through the center core. If the top or bottom end cap is open, measure the inner diameter (ID) of the hole in inches. How to Clean your Pool Filter Cartridge. When the pressure gauge on your filter reaches about 15-20 p. It is time to clean your pool filter cartridge. A good rule is to take the p. Measurement with a clean pool filter and not let the pressure go 8 above the original reading. Turn the power off to your pump and turn the valve to relieve the pressure that has built up in the filter. Remove the cartridge from the canister and place in an area away from the pool or spa. Use a garden hose, spraying from top to bottom at a 45-degree angle, removing all dirt, debris, and oils, etc. Rotate the cartridge to clean all sides. Do not use a pressure wash nozzle as that will injure the filter media. Once the cartridge is rinsed thoroughly with clean water, place it back in the filter canister. Guaranteed excellence in performance, reliability, durability and satisfaction. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Filters”. The seller is “hubsllc” and is located in this country: US. This item can be shipped to United States.
- Country/Region of Manufacture: United States
- Type: Filter Cartridge
- Outer Diameter: 10 1/16 inch
- Inner Diameter: 6 inches
- MPN: AA-P150
- Height: 31 1/8 inches
- Brand: ALL AMERICAN Cartridges
- UPC: 810625021164
Tags: clean, clear, filter, pap150, pentair, pleatco, pool, r173216, swimming
This entry was posted on Thursday, September 15th, 2022 at 6:18 am and is filed under pleatco. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.