Posts Tagged ‘mount’
SPX0710X32 Multiport Valve Side Mount Filter Valve for Hayward S200 S240 SER
October 10th, 2024 Posted 11:11 am
Great Compatibility – Perfectly fits for Hayward S200 and S240 series sand filters pool and spa. Available in 1-1/2 inch plumbing connection size side mount. This also will retrofit any filter that has an SP071113 valve that needs replacement and upgrading. 1.5 inch FIP Pipe Size. Superior Quality – Premium grade injection molded heavy duty reinforced ABS body, strength and durability, anti-impact and anti-deformation, anti-corrosion and aging resistance, never peel, fade, or leak for all-weather performance and long-lasting reliability. High quality injection molded Noryl valve key assembly, with molded gasket for a continuously reliable seal. Special Features – This high flow and multiport valves design provides maximum performance and superior flow at lower pressure drops. Ergonomic easy-to-use lever-action handle for simple dialing of 6 positions that Filter, Backwash, Rinse, Waste, Closed, and Recirculate. Built-in sight glass for convenient backwash viewing to ensure the backwash is done. To install valve to filter, secure bulkhead nuts on valve to fittings on filter. TIGHTEN THE NUTS BY HAND ONLY. Connect pump, return, and waste lines by following the markings of the ports. VALVE TOP IS UNDER SPRING LOAD. To open top half and service valve, evenly and alternately loosen cover screws. To re-assemble the top half, place diverter on a smooth and firm surface. Make sure the pointer on handle and the arrow on diverter point to same direction. Press down the cover by depressing heavy-duty spring and secure handle with dowel pin. To re-assemble the top half to valve bottom, ensure bottom gasket and diverter sealing surface are clean and free from nicks to insure positive sealing. Tighten cover screws evenly and alternately. DO NOT OVERTIGHTEN THE SCREWS. IMPORTANT: Do not overtighten pipe fittings. Proper fitting make-up is hand tight plus one to 1-1/2 turns maximum. Always use for Teflon pipe tape or for Permatex No. Add extra sealant if male pipe fitting is undersized. To drain water from multiport valve – depress and rotate valve handle and place handle pointer between any detente positions. Thank you for your understanding. Return & Refu nd. Feedback is very important to us. We are happy to do our best to provide you with some help, whether you will place an order in our store or not.
Tags: filter, hayward, mount, multiport, s200, s240, side, spx0710x32, valve
Posted in spx0710x32
Pentair TR60 Triton II 24 inch Side Mount In Ground Pool Sand Filter (EC-140264)
October 4th, 2024 Posted 2:48 am
The Pentair Triton II TR60 Sand Filter has a 24 tank diameter that requires 325 lbs of sand for operation used on in ground pools. The Pentair Triton II TR60 Sand Filter includes all the laterals inside the tank, filter tank base, lid closure, air relief valve, and pressure gauge. This sand filter requires the use of a side mount multi-port or push-pull backwash valve. The Triton II has a durable fiberglass-reinforced tank with one-piece construction. This feature enhances durability and product life. The Pentair TR60, like other sand filters, offers the least amount of maintenance compared to other filter types. This sand filter is capable of filtering down to 20-40 microns. The #1 sand filter in the world, Triton II Side Mount Filters are the result of nearly 50 years of product. Pentair TR60 Triton II 24 inch Side Mount In Ground Pool Sand Filter (EC-140264). The #1 sand filter in the world, Triton II Side Mount Filters are the result of nearly 50 years of product evolution and refinement. It has set the industry standard for effectiveness, efficiency, long runs between service, and providing years of dependable, low maintenance operation. Note: Valve is not included with filter. Common Questions : What are the dimensions of the tank? Tank Dimensions: (DxH) 24″ x 33.5″. Weight: 40 lbs without sand. How much sand do I add? The Pentair TR60 uses 325 lbs of sand. What is the GPM flow rate? The GPM flow rate is 63 GPM. What does Triton II TR60 come with? The 140264 TR60 comes with the tank, all the laterals inside the tank, filter tank base, lid closure, air relief valve, and pressure gauge. Does the Triton II TR60 come with a backwash valve? The TR60 does not come with a backwash valve. Depending on the plumbing size on property, we suggest item number 261055 for 2″ and 261173 for 1.5″ plumbing for multi-port installations. For side mount push-pull valve installation, we suggest item number 263064. Looking for Pentair TR60 Triton II Replacement Parts? View more great items. Pentair Tank Lid 24 Sq’ Fns Plus 170019. Praher Top Assembly Valve 2in. White with Decal E-50-S2. Pleatco Filter Cartridge for Season Master 50 with Molded O-ring PLW50. Pentair 271160 Spring Washer for Pentair American Products PacFab Multiport. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
Tags: ec-140264, filter, ground, inch, mount, pentair, pool, sand, side, tr60, triton
Posted in pentair
Hayward Vari-Flo 2 Top Mount Multiport Valve Black (SP071621)
October 1st, 2024 Posted 8:29 am
SP071621 Multiport Vari-Flo Control 2 FIP Valve Top Mount, Black Hayward. Hayward SP071621 Vari-Flo XL Multiport 2 FIP Valve Top Mount, is engineered for maximum flow at lower pressure drops is the choice in multiport valves. All Vari-Flo valves feature an easy-to-use lever action handle that lets you dial up to seven valve/filter functions: filter, backwash, waste, rinse, closed, winter or recirculate. Complete with an integral sight glass that lets you see when the back washing cycle is completed, our wide selection of valve configurations allows you to match the right Vari-Flo valve to the proper application; residential, commercial, top-mount or side mount. Filter – For normal filtering and regular vacuuming. Backwash – For cleaning filter sand bed of accumulated debris. Rinse – Use after completing backwash cycle to ensure all dirty water is rinsed out of the filter to waste. Waste – By-passes the filter for draining or lowering pool water level and for vacuuming heavy debris directly to waste line. Recirculate – Water is recirculated through the valve, by-passing the filter. Closed – Shuts off the flow from the pump to the filter. Winter – For winterizing (SP0714T Only).
Replacement for Pentair 262506 Top Mount Multiport Valve 1-1/2 for Sand Filters
September 29th, 2024 Posted 4:19 pm
The multiport valve directly replace part for 262506. Compatible with Pentair Meteor, Sand Dollar, and Tagelus pool and spa sand filters. Also suitable for Pentair Sta-Rite CristalFlo II sand filter. Manufactured from durable, fiberglass-reinforced polypropylene and steel. They are designed for continuous or intermittent operation, for fresh or saltwater in-ground swimming pools or spas. Six-way Top Mount Valve. YOUR BEST ONLINE BUSINESS PARTNER. Replacement for Pentair 262506 Top Mount Multiport Valve 1-1/2 for Sand Filters. This six position valve is designed to provide all the necessary positions required to operate, maintain, troubleshoot your filter. It is provided with six operating positions and one winterize position-filter, backwash, waste, rinse, closed, and recirculate. Solve your old valve leaking problem and keep your pool and sand filter running perfectly. Our focus on products and customer services is 2nd to none. Policy: The above tab label style can be modified in left Basic – Footer Policy section. And this area is the details contents of your policies. You can add a banner for this policy as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. Return: This is the contents of your Return. You can add a banner for this Return as header and add text descriptions here. 21838 Air Line T-Fittings Union Tee for 1/4 Coupler Push-To-Connect Pack of 2. Blacksmith Tinsmith 4 Ball Mushroom Stake Pexto Taper Shank Large Pexto Plate. 710295-1 XNT 9 HW MDI 75 T for Helix 7/8 MEGA Down Imaging Dual Spectrum Chirp. For T-CELL-15-SWP Salt ChIorination Cell T 15 Replacement for Hayward TurboCell.
Tags: 1-12, filters, mount, multiport, pentair, replacement, sand, valve
Posted in replacement
Replacement for Pentair Top Mount Multiport Valve 262506 1-1/2 for Sand Filters
September 28th, 2024 Posted 4:16 pm
Replacement for Pentair Top Mount Multiport Valve 262506 1-1/2 for Sand Filters. 262506 1-1/2-Inch 6-Way Clamp Style Valve. Top Mount Multiport Backwash Valve. Fits For Pool Dnd Spa Filters. The multiport valve directly replace part for 262506. Compatible with Pentair Meteor, Sand Dollar, and Tagelus pool and spa sand filters. Also suitable for Pentair Sta-Rite CristalFlo II sand filter. Manufactured from durable, fiberglass-reinforced polypropylene and steel. They are designed for continuous or intermittent operation, for fresh or saltwater in-ground swimming pools or spas. Six-way Top Mount Valve? This six position valve is designed to provide all the necessary positions required to operate, maintain, troubleshoot your filter. It is provided with six operating positions and one winterize position-filter, backwash, waste, rinse, closed, and recirculate. Solve your old valve leaking problem and keep your pool and sand filter running perfectly. Compatible with all Sand Dollar Sand Filters 145315, 145320, 145322, 145367, 145333, 145300, SD-30, SD-35, SD-40, SD-60 and SD-80. Compatible with all Sta-Rite Cristal-Flo Sand Filters 145359, 145360, 145361, 145362, 145363, SRCF20, CFII16, CFII19, CFII22, CFII24, CFII26 and CFII26-2. Compatible with all Tagelus Sand Filters TA30, TA35D, TA40D, TA50D, and TA60D. Compatible with Meteor Sand Filters, Top Mount Sand Filters, and StarBright Filters SF-30, SF-35, SF-40, SF-50. 1-1/2-Inch 6-Way Clamp Style Valve. 1x 1-1/2” 6-Way Clamp Style Valve. A, A/C, B, C. In Ground Pools, Above Ground Pools.
Tags: 1-12, filters, mount, multiport, pentair, replacement, sand, valve
Posted in replacement
For Hayward SP0714T VariFlo Top Mount Multiport Valve Pro & VL Sand Filter 1.5
September 26th, 2024 Posted 1:42 am
For Hayward SP0714T VariFlo Top Mount Multiport Valve Pro & VL Sand Filter 1.5. Compatible with any above-ground Pro or VL series sand filter. Directly replace part for SP0714T SP714, SP714B, SP714A, SP714T1, S220T, SP0714t x, SP0715G11 (715), S244t, S244tlv, S166T, S220T. Constructed of heavy-duty stainless steel material and high quality ABS design for valve body and cover, durable and sturdy, ensure long term use. Replacing your old sand filter valve will fix the problem with leaking, freezing, etc. Filtering the water in your pool well. Lever handle allows you to use the filter function easily. The integrated glass sight can see the backwash cycle and water quality conditions, making it easy to observe the operation effect. If you have any problem with your order, please contact Me and I will do My Very best to make it right. Thanks for your support. If your item is defective, incorrect, arrived damaged or any other problems, please send us emails. Describe the nature of the problem (please include pictures if possible). You will be taken care of as quickly as possible. Easy Installation, Easy to Clean, Rot Resistant, UV Protection. Above Ground Pools, In Ground Pools.
Multiport Vari-Flo Mount Filter Valve For Hayward S200 S240 Series SPX0710X32
September 19th, 2024 Posted 6:40 pm
Multiport Vari-Flo Mount Filter Valve For Hayward S200 S240 Series SPX0710X32. Perfectly fits for Hayward S200 and S240 series sand filters pool and spa. Available in 1-1/2 inch plumbing connection size side mount. This also will retrofit any filter that has an SP071113 valve that needs replacement and upgrading. 1.5 inch FIP Pipe Size. Premium grade injection molded heavy duty reinforced ABS body, strength and durability, anti-impact and anti-deformation, anti-corrosion and aging resistance, never peel, fade, or leak for all-weather performance and long-lasting reliability. High quality injection molded Noryl valve key assembly, with molded gasket for a contin. This high flow and multiport valves design provides maximum performance and superior flow at lower pressure drops. Ergonomic easy-to-use lever-action handle for simple dialing of 6 positions that Filter, Backwash, Rinse, Waste, Closed, and Recirculate. Built-in sight glass for convenient backwash viewing to ensure the backwash is done. Feedback is very important to us. We are pleased to assist you, regardless of whether you intend to place an order with us. We will do our best to resolve any issues you may have. We appreciate your concerns and frustrations, and will do our utmost to resolve the issues. We value our customers and are committed to providing them with the best possible service. In the event of a defect or damage, please report it immediately. YOOCHIDA is a professional automotive parts supplier and service provider. We place great emphasis on after-sales service, aiming to ensure that every customer is satisfied. If you encounter any problems during the purchasing process, our after-sales service team will promptly resolve them for you. In summary, YOOCHIDA is committed to providing customers with a perfect shopping experience. Our products are of the highest quality, our services are of the utmost professionalism, and our after-sales support is guaranteed. We are confident that we are your ideal choice.
Tags: filter, hayward, mount, multiport, s200, s240, series, spx0710x32, valve, vari flo
Posted in multiport
SPX0710X32 Multiport Valve Side Mount Filter Valve for Hayward S200 S240 SER
September 17th, 2024 Posted 2:23 am
PX0710X32 Multiport Valve Side Mount Filter Valve for Hayward S200 S240 SER. Perfectly fits for Hayward S200 and S240 series sand filters pool and spa. Available in 1-1/2 inch plumbing connection size side mount. This also will retrofit any filter that has an SP071113 valve that needs replacement and upgrading. 1.5 inch FIP Pipe Size. Premium grade injection molded heavy duty reinforced ABS body, strength and durability, anti-impact and anti-deformation, anti-corrosion and aging resistance, never peel, fade, or leak for all-weather performance and long-lasting reliability. High quality injection molded Noryl valve key assembly, with molded gasket for a continuously reliable seal. This high flow and multiport valves design provides maximum performance and superior flow at lower pressure drops. Ergonomic easy-to-use lever-action handle for simple dialing of 6 positions that Filter, Backwash, Rinse, Waste, Closed, and Recirculate. Built-in sight glass for convenient backwash viewing to ensure the backwash is done. To install valve to filter, secure bulkhead nuts on valve to fittings on filter. TIGHTEN THE NUTS BY HAND ONLY. Connect pump, return, and waste lines by following the markings of the ports. VALVE TOP IS UNDER SPRING LOAD. To open top half and service valve, evenly and alternately loosen cover screws. To re-assemble the top half, place diverter on a smooth and firm surface. Make sure the pointer on handle and the arrow on diverter point to same direction. Press down the cover by depressing heavy-duty spring and secure handle with dowel pin. To re-assemble the top half to valve bottom, ensure bottom gasket and diverter sealing surface are clean and free from nicks to insure positive sealing. Tighten cover screws evenly and alternately. DO NOT OVERTIGHTEN THE SCREWS. IMPORTANT: Do not overtighten pipe fittings. Proper fitting make-up is hand tight plus one to 1-1/2 turns maximum. Always use for Teflon pipe tape or for Permatex No. Add extra sealant if male pipe fitting is undersized. To drain water from multiport valve – depress and rotate valve handle and place handle pointer between any detente positions. If you need return, please contact our customer service representative, let us know the detailed problem. Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues. We care about our valued customers, and will always try to help you.
Tags: filter, hayward, mount, multiport, s200, s240, side, spx0710x32, valve
Posted in spx0710x32
Pentair Multiport Backwash Backwash Valve, 1-1/2 in. Top Mount, Clamp (272526)
September 16th, 2024 Posted 2:20 am
Pentair Multiport Backwash Backwash Valve, 1-1/2 in. Top Mount, Clamp (272526).
SPX0710X32 Multiport Valve Side Mount Fits for Hayward S200 and S240 Sand Filter
September 15th, 2024 Posted 10:15 am
SPX0710X32 Multiport Valve Side Mount Fits for Hayward S200 and S240 Sand Filter. Perfectly fits for Hayward S200 and S240 series sand filters pool and spa. Available in 1-1/2 inch plumbing connection size side mount. This also will retrofit any filter that has an SP071113 valve that needs replacement and upgrading. 1.5 inch threaded. This high flow and multiport valves design provides maximum performance and superior flow at lower pressure drops. Ergonomic easy-to-use lever-action handle for simple dialing of 6 positions that Filter, Backwash, Rinse, Waste, Closed, and Recirculate. Built-in sight glass for convenient backwash viewing to ensure the backwash is done. Premium grade injection molded heavy duty reinforced ABS body, strength and durability, anti-impact and anti-deformation, anti-corrosion and aging resistance, never peel, fade, or leak for all-weather performance and long-lasting reliability. High quality injection molded Noryl valve key assembly, with molded gasket for a continuously reliable seal. SPX0710X32 Multiport Valve Side Mount. We aims to provide the best service for our customer.