Low Priced Pool Filters

Just another WordPress site

Archive for September 3rd, 2018

4 PAC Hayward CX880XRE Swim Clear C4025 Filbur FC-1226 Pleatco PA106 Pool Filter

Comments Off

September 3rd, 2018 Posted 5:06 pm

4 PAC Hayward CX880XRE Swim Clear C4025 Filbur FC-1226 Pleatco PA106 Pool Filter


4 PAC Hayward CX880XRE Swim Clear C4025 Filbur FC-1226 Pleatco PA106 Pool Filter


4 PAC Hayward CX880XRE Swim Clear C4025 Filbur FC-1226 Pleatco PA106 Pool Filter


4 PAC Hayward CX880XRE Swim Clear C4025 Filbur FC-1226 Pleatco PA106 Pool Filter


4 PAC Hayward CX880XRE Swim Clear C4025 Filbur FC-1226 Pleatco PA106 Pool Filter


4 PAC Hayward CX880XRE Swim Clear C4025 Filbur FC-1226 Pleatco PA106 Pool Filter. MADE IN THE USA! Height: 25 1/2 inches. Outer Diameter: 7 inches. Inner Diameter: 3 inches. REEMAY Filtration Fabric Pool and Spa Owners and Technicians rely on cartridges made with REEMAY, to perform consistently over time and to require less maintenance. REEMAY sets the industry standard for filtration media and remains the most trusted fabric in cartridge filtration. Higher dirt-holding capacity for sparkling water. Unique trilobal fibers increase filtration performance. Greater strength and durability holds up under pressure and to multiple cleanings. SURE FLOW MOLDED CORES. ANTIFUNGAL BIOCIDE, HIGH IMPACT END CAPS. Please make sure your address is correct. Please ask for a quote. Must be unused, in the original cellophane wrapper, and able to be resold. Please put the RGA# provided, so proper credit can be issued. Most issues can be resolved right away. The length of time a cartridge lasts depends on several factors. THE MOST IMPORTANT ONE IS , the number of times the cartridge is cleaned and how cleaned, not power washed. In season the cartridge should be cleaned every 4-5 weeks. If there is a lot of debris or algae, the cartridge will need to be cleaned every day until the pool is clean. If cartridges are not cleaned often enough, they will collapse. The condition of the pool when installed, the amount of debris, algae, or pollen. The length of the swimming season. The water chemistry of the pool. Whether the pool is inside a screened in area. The number of swimmers, suntan lotion, pets in the pool, etc. The outlying area around the pool if treated for insecticides, fertilizers, etc. The chemicals used to treat the pool; chemicals used to remove phosphates break down the filter media. Cartridges will need to be replaced after acid washing the pool, resurfacing the pool, and or phosphate treatments. Always keep an eye on the PRESSURE GUAGE, and when the pressure rises 8 LBS from the day you install, this usually means the cartridges need to be cleaned. How to Measure your Pool Cartridge to 1/16 inch. Measure the outside diameter (OD) of the cartridge across the top of the end cap in inches. Measure the overall length of the cartridge in inches including the end caps. Do not include any handles or threads on the bottom end cap. When possible one of the best ways to measure is through the center core. If the top or bottom end cap is open, measure the inner diameter (ID) of the hole in inches. How to Clean your Pool Filter Cartridge. When the pressure gauge on your filter reaches about 15-20 p. It is time to clean your pool filter cartridges. A good rule is to take the p. Measurement with a clean pool filter and not let the pressure go 8 above the original reading. Turn the power off to your pump and turn the valve to relieve the pressure that has built up in the filter. Remove the cartridges from the canister and place in an area away from the pool or spa. Use a garden hose, spraying from top to bottom at a 45-degree angle, removing all dirt, debris, and oils, etc. Rotate the cartridge to clean all sides. Do not use a pressure wash nozzle as that will injure the filter media. Once all cartridges are rinsed thoroughly with clean water, place them back in the filter canister. Guaranteed excellence in performance, reliability, durability and satisfaction. The item “4 PAC Hayward CX880XRE Swim Clear C4025 Filbur FC-1226 Pleatco PA106 Pool Filter” is in sale since Friday, July 13, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Filters”. The seller is “hubsllc” and is located in Eustis, FL. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

  • Brand: ALL AMERICAN CARTRIDGES
  • Type: Filter Cartridge
  • MPN: AA-H880-4
  • Material: Reemay Fabric
  • Country/Region of Manufacture: United States
  • Outer Diameter: 7 inches
  • Inner Diameter: 3 inches
  • Height: 25 1/2 inches

Intex 28651EG Krystal Clear Sand Filter Pump for Above Ground Pools, 16

Comments Off

September 3rd, 2018 Posted 9:04 am

Intex 28651EG Krystal Clear Sand Filter Pump for Above Ground Pools, 16


Intex 28651EG Krystal Clear Sand Filter Pump for Above Ground Pools, 16-inch, 110-120V with GFCI. Keep your above ground pool water clean, soft, and refreshing with the Krystal Clear Sand Filter Pump by Intex. The all-natural sand provides excellent water filtration as the 6-function control valve allows the pool owner to filter, backwash and rinse, recirculate, drain and close the system. The built in 24-hour timer adds to the hassle-free experience with maintaining a cleaner pool. The strainer basket provides easy-cleaning, and prolongs the life of the sand. The Krystal Clear Sand Filter Pump generates a pump flow rate of 3,000 gallons per hour, ideal for above ground pools 16′ and above. This pump requires virtually no maintenance except replacement of sand every 5 years. Pump Flow Rate: 3,000 gph (11.3 m3/hr). System Flow Rate: 2,450 gph (9.2 m3/hr). Pump motor HP: 0.75, operates at 75% efficiency. Pool pump motor capacity: 0.59 HP. Name plate HP: 0.54. The item “Intex 28651EG Krystal Clear Sand Filter Pump for Above Ground Pools, 16″ is in sale since Tuesday, August 28, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Filters”. The seller is “tadzioretail” and is located in Buffalo, New York. This item can be shipped to United States.

  • Modified Item: No
  • Custom Bundle: No
  • Pool Type: Above-Ground
  • MPN: 28651EG
  • Brand: Intex
  • Non-Domestic Product: No

4 PACK Pentair Clean & Clear Plus 320 Pleatco PCC80 Filbur FC-1976 Pool Filter

Comments Off

September 3rd, 2018 Posted 1:01 am

4 PACK Pentair Clean & Clear Plus 320 Pleatco PCC80 Filbur FC-1976 Pool Filter


4 PACK Pentair Clean & Clear Plus 320 Pleatco PCC80 Filbur FC-1976 Pool Filter


4 PACK Pentair Clean & Clear Plus 320 Pleatco PCC80 Filbur FC-1976 Pool Filter


4 PACK Pentair Clean & Clear Plus 320 Pleatco PCC80 Filbur FC-1976 Pool Filter


4 PACK Pentair Clean & Clear Plus 320 Pleatco PCC80 Filbur FC-1976 Pool Filter. MADE IN THE USA! Pentair Clean and Clear Plus 320. Outer Diameter: 7 inches. Inner Diameter: 3 inches. REEMAY Filtration Fabric Pool and Spa Owners and Technicians rely on cartridges made with REEMAY, to perform consistently over time and to require less maintenance. REEMAY sets the industry standard for filtration media and remains the most trusted fabric in cartridge filtration. Higher dirt-holding capacity for sparkling water. Unique trilobal fibers increase filtration performance. Greater strength and durability holds up under pressure and to multiple cleanings. SURE FLOW MOLDED CORES. ANTIFUNGAL BIOCIDE, HIGH IMPACT END CAPS. Please make sure your address is correct. Please ask for a quote. Must be unused, in the original cellophane wrapper, and able to be resold. Please put the RGA# provided, so proper credit can be issued. Most issues can be resolved right away. The length of time a cartridge lasts depends on several factors. THE MOST IMPORTANT ONE IS , the number of times the cartridge is cleaned and how cleaned, not power washed. In season the cartridge should be cleaned every 4-5 weeks. If there is a lot of debris or algae, the cartridge will need to be cleaned every day until the pool is clean. If cartridges are not cleaned often enough, they will collapse. The condition of the pool when installed, the amount of debris, algae, or pollen. The length of the swimming season. The water chemistry of the pool. Whether the pool is inside a screened in area. The number of swimmers, suntan lotion, pets in the pool, etc. The outlying area around the pool if treated for insecticides, fertilizers, etc. The chemicals used to treat the pool; chemicals used to remove phosphates break down the filter media. Cartridges will need to be replaced after acid washing the pool, resurfacing the pool, and or phosphate treatments. Always keep an eye on the PRESSURE GUAGE, and when the pressure rises 8 LBS from the day you install, this usually means the cartridges need to be cleaned. How to Measure your Pool Cartridge to 1/16 inch. Measure the outside diameter (OD) of the cartridge across the top of the end cap in inches. Measure the overall length of the cartridge in inches including the end caps. Do not include any handles or threads on the bottom end cap. When possible one of the best ways to measure is through the center core. If the top or bottom end cap is open, measure the inner diameter (ID) of the hole in inches. How to Clean your Pool Filter Cartridge. When the pressure gauge on your filter reaches about 15-20 p. It is time to clean your pool filter cartridges. A good rule is to take the p. Measurement with a clean pool filter and not let the pressure go 8 above the original reading. Turn the power off to your pump and turn the valve to relieve the pressure that has built up in the filter. Remove the cartridges from the canister and place in an area away from the pool or spa. Use a garden hose, spraying from top to bottom at a 45-degree angle, removing all dirt, debris, and oils, etc. Rotate the cartridge to clean all sides. Do not use a pressure wash nozzle as that will injure the filter media. Once all cartridges are rinsed thoroughly with clean water, place them back in the filter canister. Guaranteed excellence in performance, reliability, durability and satisfaction. The item “4 PACK Pentair Clean & Clear Plus 320 Pleatco PCC80 Filbur FC-1976 Pool Filter” is in sale since Friday, July 13, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Filters”. The seller is “hubsllc” and is located in Eustis, FL. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

  • Brand: ALL AMERICAN CARTRIDGES
  • Type: Filter Cartridge
  • MPN: AA-P320-4
  • Material: Reemay Fabric
  • Country/Region of Manufacture: United States
  • Outer Diameter: 7 inches
  • Inner Diameter: 3 inches
  • Height: 20 inches