Hayward SwimClear C4030 Replacement Cartridges, 4-Pack, 425 Sq Ft (CX880XREPAK4)
We Make Swimming Better! Pool Ladder and Rails. Pool Toys and Floats. Hayward SwimClear C4030 Replacement Cartridges, 4-Pack, 425 Sq Ft (CX880XREPAK4). NSF Certified in Hayward Filters. 4 Cartridges per Pack. Hayward CX880XREPAK4 SwimClear Replacement Cartridge 4-Pack, 425 Sq Ft, for C4030 Filters. Four genuine cartridges for the 425 sq ft SwimClear. 7 x 25.5 in. The Hayward CX880XREPAK4 is a 4-pack of genuine Hayward CX880XRE replacement cartridges, a full 425 sq ft set for the SwimClear C4030 multi-element cartridge filter, which takes four. Hayward also lists the CX880XRE for the C4000, C4020 and C4025. Each cartridge measures 7 in across by 25-1/2 in long, with 106 sq ft of 4 oz media. A Full C4030 Set. Hayward’s SwimClear manual calls for four CX880XRE elements in the C4030, and this pack holds four, for the filter’s full 425 sq ft. Hayward’s replacement cartridge chart lists the CX880XRE for the C4000, C4020, C4025 and C4030, each of which takes four cartridges. NSF-Certified 4 oz Media. Hayward’s premium 4 oz cartridges carry NSF certification when used in Hayward filters. SwimClear elements use reinforced polyester media. Molded and Extruded Cores. Hayward builds these cartridges on precision-engineered molded and extruded cores for hydraulic efficiency and structural stability. Works With Any Sanitizer. Hayward states its replacement cartridges are compatible with any pool sanitizer. Each cartridge is individually packaged, with the part number molded into colored end caps and a bar code label on the shrink-wrapped package. Hayward states the filter should be installed and serviced only by a qualified pool professional. The system runs under pressure: before opening the filter, turn off all circulation pumps and power, set the valves to stop flow to the filter and open the manual air relief valve. Hayward warns that system pressure can cause explosive separation of the upper filter body if its safety and operation instructions are not followed. Single Cartridge Part Number. Replacement element, 425 sq ft SwimClear. Filter Area per Cartridge. Top / Bottom Openings. 3 in open top, 3 in open bottom. 4 oz reinforced polyester. Hayward SwimClear C4030, C4025, C4020 and C4000. Clean or Replace At. 7 to 10 psi above starting pressure. Which filters does this 4-pack fit? Hayward lists the CX880XRE cartridge for the SwimClear C4030, C4025 and C4020 and the C4000, four per filter. It does not fit the C2030, C3030, C5030 or C7030, which use the CX481XRE, CX580XRE, CX1280XRE and CX591XRE. How many cartridges does my C4030 need? Hayward’s parts list shows the CX880XRE as 1 of 4 required, so this 4-pack replaces the full set. When should I clean or replace the cartridges? Hayward says to clean or replace the elements when filter pressure rises 7 to 10 psi above the clean starting pressure. If the starting pressure after cleaning is more than 6 psi above the reading with new cartridges, replace them the next time the gauge reaches the red arrow. How do I clean a SwimClear cartridge? Hayward recommends washing each cartridge inside and out with a garden hose, then carefully brushing the pleated surface. Do not pressure wash, since that can damage the element. How do I know the cartridges are genuine Hayward? Hayward says genuine cartridges carry a bar code label on the shrink-wrapped package showing the part number, and the part number is molded into the colored end caps.
Tags: 4-pack, c4030, cartridges, cx880xrepak4, hayward, replacement, swimclear
This entry was posted on Sunday, November 15th, 2026 at 5:13 pm and is filed under hayward. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.